How to Attach Your Dishwasher to a Granite Countertop

Many dishwashers come with a template that you can use to mark the holes for drilling. If your dishwasher didn’t come with a template, you can make your own by tracing the dishwasher’s mounting bracket onto a piece of cardboard. Once you have the template, use a drill to create the holes for mounting the dishwasher.

Checkout this video:


Dishwashers are a necessity in most modern kitchens, but they can be a bit of an eyesore. If you have a granite countertop, you may be wondering how to attach your dishwasher so that it blends in with the rest of your kitchen. Luckily, there are a few different ways to do this.

First, you’ll need to purchase some brackets or adhesive strips specifically designed for attaching dishwashers to granite countertops. These can be found at most hardware stores. Once you have your supplies, follow the instructions below to get started.

1. Clear off a section of your countertop where the dishwasher will go. Make sure the area is clean and dry before proceeding.
2. Attach the brackets or strips to the underside of the dishwasher, following the manufacturer’s instructions.
3. Position the dishwasher on the countertop so that it is level and flush with the rest of the surface.
4. Use screws or nails to secure the dishwasher in place, again following the manufacturer’s instructions.
5. That’s it! Your dishwasher should now be securely attached to your granite countertop.

Tools and Materials Needed

In order to attach your dishwasher to a granite countertop, you will need the following tools and materials:
-Dishwasher installation kit
-1/8″ drill bit
-3/16″ drill bit
-5/16″ drill bit
-Screws (1″, 1 1/4″, and 1 1/2″)
-Cordless power drill/driver
-Socket wrench set
-Plumber’s putty
-Silicone caulk
-(Optional) Reciprocating saw

Step-by-Step Instructions

1. Turn off the power to your dishwasher at the breaker box.

2. Place a putty knife under the lip of the dishwasher’s end panel to release it from the retaining clips. Pry the end panel off and set it aside.

3. Feed the electrical cord through the opening in the cabinet side wall, then slide the dishwasher into position underneath the countertop so that the electrical cord is accessible from below.

4. Mark the position of the mounting holes on the underside of the countertop, using a pencil. Remove the dishwasher and drill pilot holes at the marked positions, using a 1/8-inch drill bit.

5. Apply a bead of silicone caulk around the perimeter of the mounting holes on the underside of the countertop. Position the dishwasher in place and secure it to the countertop with screws driven through washers into eye bolts that have been screwed into captive nuts in the dishwasher’s underside (consult your dishwasher’s installation instructions for specifics).

6. Reattach the end panel to the dishwasher with the retaining clips or screws, as appropriate (consult your dishwasher’s installation instructions).
Restore power to the dishwasher at the breaker box and test it by running a cycle empty withoutanydetergentorfoodwasteto ensure that it is functioning properly before loading it with dirty dishes!

Tips and Tricks

Dishwashers come in standard sizes, but the method of installation can vary according to the type of countertop. If you have a granite countertop, you will need to take special care when attaching your dishwasher. Here are some tips and tricks to help you get the job done right.

– first, find the right size dishwasher for your granite countertop. The dimensions of your dishwasher should be slightly smaller than the opening in your granite countertop. This will ensure a tight fit and prevent water from leaking through.
– next, attach the brackets that came with your dishwasher to the underside of your granite countertop. You may need to use special tools to do this, so be sure to consult your dishwasher’s instructions.
– once the brackets are in place, lift your dishwasher into place and align it with the opening in your granite countertop. Carefully lower it down so that the brackets fit snugly into place.
– finally, use screws or bolts to secure your dishwasher to the brackets. Be sure to use ones that are long enough to go through both the granite and the metal of the dishwasher itself. With everything in place, you can now finish installation according to your dishwasher’s instructions.


Q: Can I attach my dishwasher to a granite countertop?

A: Yes, you can attach your dishwasher to a granite countertop, but you will need to use special brackets and screws that are designed for this purpose. Be sure to follow the manufacturer’s instructions carefully to avoid damaging your countertop.

Q: How do I attach the dishwasher to the granite countertop?

A: First, clean the area where the dishwasher will be attached with rubbing alcohol. Then, position the brackets on the underside of the dishwasher and mark the drill holes. Next, drill pilot holes into the countertop. Finally, insert the screws and tighten them until they are snug.


In conclusion, it is possible to attach your dishwasher to a granite countertop, but you will need to take some extra precautions to ensure that it is properly secured. Granite is a very strong and durable material, but it can be susceptible to chipping or cracking if not properly supported. Dishwashers are also quite heavy, so you will need to make sure that your granite countertop can support the weight of the dishwasher. If you are not confident in your ability to properly attach the dishwasher, it is always best to hire a professional to do the job for you.

Scroll to Top